During fall, you may experience some condensation on your windows when you turn on your heating systems. In extreme cases, you might even notice water running down the glass windows. This could be a temporary annoyance. In some cases, this may signal a more serious moisture problem.
In order to solve this problem, you should know how moisture circulates inside your home. If the situation is not serious, you will only have to make some changes to your daily routines. If the problem is serious, you will have to modify your windows, add ventilation and improve heating equipment.
Why Do My Windows get Foggy?
You will notice steam on the windows when vapor in the air of your home condenses on the cool glass surface. Since windows are some of the coolest surfaces in your home, moisture tends to form there first. Condensation occurs when moisture comes into contact with a cool surface.
How to Solve the Wet-Window Problem
For most homeowners foggy windows are a temporary annoyance. When you are a few weeks into the heating season, indoor air will dry and then steam will stop forming on the windows. However, in some other homes condensation may continue and become a more serious problem. If you allow water to run off the windows, it will eventually damage wood surfaces causing rotting window sills or mildew problems. Also, ice might form on your windows and window frames. This problem should be fixed before it supports mildew growth and rots wood. There are two ways to reduce window condensation problems. First, you have to reduce moisture levels inside your home. Second, you have to increase the surface temperature of glass windows.
How to Reduce Moisture Levels
The most effective way to reduce moisture levels inside your home is to limit the sources of moisture. Activities such as cooking, washing and showers increase the moisture level in the air. Here are a few things you can do.
- Fix damp basement problems. Drainage problems too should be corrected.
- Make sure that your basement floors and walls are sealed and that the sump pump maintains the water level approximately 12 inches below the basement floor.
- Turn off the humidifier if your furnace has one built into it. You should also cut off the supply of water to the humidifier.
- Don’t dry clothes indoors. You also need to ensure that your clothes dryer vent to the outside.
- Keep firewood outside and limit aquariums and plants.
- Don’t use kerosene heaters indoors.
- Make sure that your water heaters and furnaces are drafting up the chimney properly.
If you cannot reduce the sources of moisture, you should increase ventilation. There are several ways to do this. Use ventilation fans in your bathrooms. Use kitchen exhaust fans when you cook food. You also need to ensure that they are routed outside. Keep a window slightly open when condensation begins to occur. Dehumidifiers may help but they consume a great deal of electricity.
Increase the Surface Temperature of your Window Glass
Open curtains to increase the circulation of air around the windows. Use ceiling fans. You should also consider directing warm-air supply ducts towards windows. All of these steps will make windows warmer. Jans Awning Products is located in Burlington, Ontario. We install windows and awnings all throughout Burlington, Hamilton, Milton and Binbrook. If your windows are covered in mildew or are rotting out, give us a call to repair your windows and assist with fixing your houses’s moisture problems.
As we endure a classic Canadian winter, full of snow, ice, wind and storms, it’s great to have a place to get away and enjoy the sunshine. While many of us spend money on a trip south to catch up on some vitamin D, there are ways to enjoy the sun at home all year round. If your finding yourself trapped indoors all winter long, consider the addition of a sun room to your home.
What is a Sunroom?
Also known as a solarium, Florida room or garden room, a sun room located in a home allows for full enjoyment of the surrounding landscape while being completely sheltered from less-than-perfect weather conditions. Sunrooms can come in all shapes and sizes but usually protrude from the home so that there are more exterior walls and window opportunity.
A sunroom is a great investment for your family because while adding value to your home, you are gaining something that your family will enjoy. On average a sunroom’s value is about twice its cost. The cost of a sunroom depends on the size, scope, quality of finishes and conditions of the construction area. It is important to get comparable quotes when committing to an investment like this. Remember, if multiple homes in your area are for sale, a sunroom can make the difference in what sells first.
When making the decision to design and build a sun room there are many factors to consider. First the location and size should be determined so that you know what style of finishes you can afford for the space. Next the roof style, foundation and deck, type of glass, flooring, and furnishing and décor will be chosen to complete the look you desire.
To build a sunroom on your property, your engineer’s plans must be approved with a building permit, distributed by the relevant municipality. The job must be completed and passed by a municipal building inspector. Different factors must be considered such as snow, wind and soil bearing load for the design. All building roof structures must be designed to hold adequate snowfall determined by the municipality, as well as stress caused by wind and the soil below the sunroom must also be checked. It is also important to consider any Green Certifications you would like your sunroom to qualify for such as an Energy Star rating or a Gold Level Certification. These qualifications may cause the initial cost of the sunroom to increase, but money can be saved on the maintenance on this room for years to come, as well as its impact on the environment.
Many new homes are often built with sliding doors, especially as alternative exits to the home or leading to the backyard. Sliding doors provide excellent sight lines to the outdoors and a source of natural light in the home. When old homes are renovated, many owners decide to change over to sliding doors for entry ways that look out to personal property. However, especially in a northern climate, are sliding doors an efficient option for your home?
If you live in an older home with original doors and windows, any new door will insulate better than older types and replacing them can be a good investment resulting in lower heating and cooling costs.
When purchasing new doors the best way to determine if they are an energy efficient option is to check their energy performance rating. This will make it easier to purchase a door most appropriate for your home’s climate and orientation. The energy performance rating will provide information about their potential for gaining and losing heat as well as transmitting sunlight into your home.
Heat Gain and Loss
Sliding doors can lose heat through direct conduction through the glass or glazing, frame or door. The radiation of heat into a house and out of a house from room-temperature objects. Although uncommon in most new doors, air leakage through and around them can cause heat loss, usually when installed incorrectly.
In comparison to most new doors, sliding doors usually lose much more heat than other doors because glass (the main component in sliding doors) is a very poor insulator. The most energy efficient glass doors will have metal frames with a thermal break which is a plastic insulator between inner and outer parts of the frame. Models with several glass layers are a good investment, especially in extreme climates. You can also use a foam caulking to help seal the new door frame as well as weatherstripping. Weatherstripping can be replaced annually to ensure the best seal possible around your doorways. Regardless of age or style, swinging doors still offer a much tighter seal than sliding doors. However, most home owners are still very drawn to sliding doors and they are often seen as a great value-add to any home because of high demand.
Every year, billions of birds smash into glass windows and kill themselves. Have you ever wondered why this happens? Is there a way to prevent this from happening?
Birds fly into windows because they can’t see the glass. They only see the reflections of trees and other natural elements in the glass. They assume that they can fly through the landscape reflected in the window. Unfortunately, they can’t.
One way of preventing this from happening is to make them realize that there is something there. Glass windows are one of the greatest threats that birds face today. They pose a threat to all bird species, but migratory birds are the biggest victims of these home design elements.
When birds hit windows, most of them die instantly. Others fall prey to predators like gulls and cats. Not only skyscrapers, private homes also endanger birds.
Why birds hit the windows?
Birds don’t see a glass window as a barrier. They only see the reflections of the trees or the sky. This is not surprising because sometimes people also walk into glass doors. While this is merely a matter of embarrassment for us, it is fatal for birds.
Home owners can prevent or reduce these collisions in several ways. Here are some solutions to this problem.
If you place bird feeders outside your windows, make sure that they are within 3 feet of the window. This will ensure that birds eating from the feeder will not gain enough speed to hurt themselves even if they try to fly through the window.
Another inexpensive and uncomplicated solution is to install a pattern on the window. Decals of hawks are not very helpful. The birds will probably never realize whether they are an abstract design or birds of prey.
Other seasonal fixes include the following.
• Place tape strips vertically or horizontally on the outside of the window. They are highly effective.
• Use window paints to obscure the window.
• Draw blinds. If you have indoor plants near the windows move them away. However, this will not help if there are reflections of the surroundings in the window.
Permanent fixes include the following:
• Install an opaque window film. This will reduce reflectivity and keep birds from hitting the windows. You can buy films that look opaque from the outside but allow you to view everything from inside. Films have to be placed on the outside of the windows for maximum effect. There is no guarantee that they will stay on these surfaces for a long time, but most of them do.
• Install awnings or shades in front of the windows. They are quite effective. They not only prevent birds from hitting your glass windows, but also provide protection from heat and dust.
• Install netting in front of the windows.
Glass Window Conclusions:
Glass windows are here to stay. They allow you to watch birds, plants and trees from inside your home. Though unintended, bird casualties are a consequence of modern home design. However, by applying some creativity you can make your windows safe for the birds.
Branding is essential for the success of your business. It helps you stand out from our competition. Your logo isn’t the only branding tool that you have at your disposal. Your corporate awnings also play a crucial role in improving the recognition of your brand.
Awnings not only provide protection from weather elements; they are also great branding tools. Even large corporations use awnings as a marketing tool.
How to use awnings to promote your brand
Many organizations use awnings to protect their commercial space from heat and dust. Besides offering protection from the weather elements, they act as excellent marketing tools. Corporate awnings are quite versatile. They offer numerous benefits. They can complement your signage and the exterior of your building. Here are some of the benefits offered by commercial awnings.
Anwnings Create an Impression
Awnings complete the look of your commercial building. They add a signature touch to the façade. Small businesses install awnings above their doors and windows. One way of impressing your brand upon your customers is to use awnings made with your corporate colors and logo. Install them on the exterior of your buildings to brand your business.
Create Landmarks with Awnings
Some businesses occupy historic buildings. This is done to distinguish them from their competition. However, in cities most buildings look more or less the same. You can make your corporate structure stand out from the rest by having unique awnings installed on them. This will differentiate your building from other similar looking buildings in its surroundings. This is a great branding method. In addition, the awnings will enhance the look of your building.
The same awnings can be used to cover your side entrances and parking areas. They provide a consistent look to your commercial property and also offer protection from the weather elements. To make your business look modern and smart, you have to work on your branding efforts continuously.
You need a building permit to install an awning on your commercial structure in Burlington. You have to follow certain norms. There are also restrictions regarding the kind of materials that can be used.
• All awnings installed over your commercial building have to be supported by metal rods. They should be attached to the building and leave the sidewalk unobstructed. All awnings have to be installed at least seven feet above the sidewalk.
• The awning fabric should cover the supporting structure properly. There should be no unsecured/loose edges.
• The colours as well as the materials should blend well with the surrounding structures. Make sure that you choose awnings that complement the overall design theme of the street.
• The awning has to be installed in such a way that it does not extend into public sidewalk.
• The awning has to be installed below the signage that represents your company.
• Lighting and other materials attached to the awning should be fixed to the supporting structure properly.
As we have already seen, commercial awnings are great branding tools. If you need help with choosing the right kind of awnings for your business, get in touch with us.
Patio shade structures are of different kinds, shapes and sizes. They can be used to cover a small patio or a high-rise terrace. They can also be used to cover larger areas. Most types of patio shade structures are seasonal for Ontario. Most are not supposed to stay in place throughout the year. You have to take them out during the off-season and store them safely.
By winterizing your patio shade structures, you can enhance their durability and also keep them looking attractive for a long time.
How to winterize your patio shade structures
It is easy to winterize your patio structures. You only have to follow these steps.
Inspect the shade structures thoroughly
Your awnings and canopies wear out over time. Accidents may also cause damage to them. Inspect the entire structure carefully. Look for signs of damage. See if the fittings and fabric are tight and snug. If you find loose hardware, tighten it.
Look for tiny tears or worn spots in the fabric. Make sure that the stitching is not coming unraveled. If your awnings have a valance, they should be inspected more closely. As they flutter in the wind, they may wear out easily.
If you spot signs of damage, you have to make repairs right away. If you wait until the spring to fix them, the problem may get worse. Before you even realize it, a tiny hole may metamorphose into an unsightly rip. A simple repair will not burn a hole in your pockets. Replacements, on the other hand, are quite costly.
Clean all parts carefully
Do not use abrasive materials or harsh cleaning agents to clean your shade structures. Wash the fabric using a soap solution and rinse thoroughly. Dry it well before storing it away.
Dust off any dust or dirt that may have accumulated over time. Debris may leave scratches on the metal or fabric while you clean it. In any case, you cannot allow debris to settle because it can stain the fabric.
Dismantle the structure
You have to fold or roll the framework in the right way to protect the parts. Most seasonal canopies support compact storage. If the structure does not have a carrying case, wrap it in a sheet so that it does not get dirty.
Retractable awnings will stay in place during off-season as well. They have a permanently mounted housing to protect them from harsh winter elements.
Store them properly
If you have been using these shade structures for several years, you should know how to store them properly. If you are not familiar with these structures you should seek the help of a good awning company. They will be able to answer all questions you have about winterizing your shade structures. They will also be able to give tips on caring for them.
Winterizing your patio shade structures is easier than you think. Also it doesn’t take too long. If you set aside some time for this, you can prolong the life of your shade structures.
Jans Awnings Products carries the high-quality vinyl windows from North Star. We are specialists in bow and bay windows, but offer the entire line of these windows and doors. The current day marketplace is chock full of replacement window and door products, but North Star products are unrivaled in terms of quality and popularity.
North Star windows and patio doors have all been specially-designed and built to effectively withstand the extreme weather conditions that prevail across Canada. Independent agency checks have proved that these products exceed the existing industry standards for insulation value and security. North Star provides the Low-E glass technology which is definitely an energy-saving advantage.
This is one of the standard features of all the windows and doors. All North Star windows are available with the Pilkington Activ™ brand of Self-Cleaning Glass. You can also opt for Argon and Krypton gas-filled, Tempered, Bronze and Gray-tint, Obscure or Triple glazing glass. These products provide the best insulation and help in reducing your energy bills.
The Special Window Coating
Low-E is an almost invisible coating that effectively reduces heat-loss from the windows even as it lets in sufficient natural light. This is an energy-efficient and high-performance glass which has a coating designed for top-notch performance in our climate. This is why it can also be rated the highest Canadian Energy-Rating.
This glass allows the energy of the sun to filter through in the winter even as the fusion-welded construction of the windows provides the perfect seal. This simply means that when you yearn to sun-bathe in the winter (when the sun manages to appear in the skies), you can easily get your shot of Vitamin D without actually stepping outdoors.
The windows hold in the comfortable inside temperatures that you want, when it’s freezing outside. This special coating will keep out the cold and allow you the luxury to treat yourself to a natural tan even when the outdoor temperatures are sub-zero.
High Quality Installation
You will find a number of good quality products on the market, but the durability and life of a window is highly dependent on how it has been installed. All our windows and patio doors come with the transferable limited-lifetime manufacturer’s warranty. When you get North Star windows installed from Jans Awning Products, the added advantage is that the installation is guaranteed for life.
Get that Tan
And so, if you feel that you want to get a tan and your dose of Vitamin D even in the winter, contact us at 905.335.3733. We can install these high-grade North Star windows for you anywhere across the GTA.
When you choose to purchase windows and awnings from Jans Awning Products, you know that you will get the best products, backed by iron-clad warranties and the highest levels of customer services too. For more information about North Star Windows and Doors, please contact us via this online form.
Winters in Canada can be extremely severe in Southern Ontario and everyone likes to prepare their home for the long and frigid days ahead. Fireplace installations will be serviced & window and door insulation will be re-checked. Those who have awnings always worry about how they should protect them in the winter.
If you have manual fabric awnings, you might want to dismantle them & store them till spring. This is the best way of protecting the fabric from any kind of damage that the snow, ice, windstorms and cold temperatures causes. Doing this will give you “use-ready” awnings when you want them. Before dismantling, call whoever installed your awnings to see if that is the best course of action.
Winterizing Steps For Awnings
• Brush -off the dust, debris & all the leaves from your awning, and move in one direction- from its upper edge to the bottom edge
• Hose-off the awning & remove any dirt/debris that is stuck to it. Use a soft-bristled brush to carefully remove all the stains & dirt spots
• Dissolve a little bit of mild soap in a bucketful of warm water and scrub the awning clean with it. Make sure that the brush does not dry out while the cleaning is in progress
• Thoroughly rinse the awning with a hose
• Air it completely out and ensure that there is no dampness before you store it as this can result in moss & mildew growth
• If there is a hanging valance, remove it & hose that down well. Use a bit of mild-soapy water & clean-off all the dirt & dust from it with a very soft-bristled brush
• Let it dry out completely
• Roll it up properly & store it in a dry spot – this will prevent mildew/moss growth
• Just cover the valance lightly, but don’t use any plastic cover as it will trap the moisture
• In case you have a retractable awning and are not removing it from the frame, use a specialized awning cover. These functional covers provide effective protection. They entirely cover the awning installation and will ensure that there is no mildew or moss formation
Things to Remember with Awnings
• Test the mild soap properly on a small hidden area of the awning & ensure that it isn’t causing any damage
• Read the recommendations of the manufacturer and check which cleaning agents are best for your awning & check about the best care methods
High Quality Products
We provide very high-quality products that will give you trouble-free service for a number of years. Under regular use, Jans Awning Products remain waterproof for a long time. But, over years the elements may wear away at the waterproofing. If, upon inspection, you find that there is some moisture or water inside or any sign of water-penetration, apply a reproofing agent to the awning. Check manufacturer recommendations about the agent that should be used.
If you are looking for the highest-quality manual/ motorized awnings across Oakville, Burlington, Mississauga, Brantford, Hamilton, Milton, Ancaster, Brampton or Grimsby, call Jans Awning Products on 905.335.3733. If you have any queries about winterizing the awnings, please contact us via this online form.
Home automation is not a new concept – people have been using smart technology to open garage doors, dim lights and set and monitor security installations on their properties. But technology is advancing at a very fast pace and the future of home automation is bright.
Latest Suite of Tools
Apple is one of the companies that has been at the fore of smart technology and has brought to market a number of products that people can use to add convenience to various functions that they need in and around their homes. In June this year, at its Worldwide Developers Conference, Apple announced its HomeKit– This highly innovative suite of tools will control a range of devices such as furnaces, thermostats, garage-door openers, security systems and blinds and awnings too.
The company will provide a robust platform which all these devices will have to conform to. Once that has been done, you will be able to control them all via your iOS device. The smart-home market is burgeoning and Apple is all set to capture it.
A Matter of Functionality
The fact is that to date a number of smart home products have been riddled with a number of compatibility issues and homeowners had to conduct a lot of ground work to ensure that their “smart” homes actually worked. But Apple says it can change all that and Home Kit will give iPhone users the ability to control various individual smart home devices from their phones via Siri and not a specific app.
This simply means homeowners will have the convenience to club different smart home devices into groups and they will be able to effectively control a series of elements all at once.
Jans Awning Products has always launched the best products and we offer our customers options like motorized awnings powered by online form and order your motorized awnings today.
Rollshutters are a definite value-add to any property, be it residential or commercial. They look great and provide increased security. In effect, they are the first line-of-defense for any property and are an excellent visual deterrent for vandals and burglars.
Not only do rollshutters provide security from intruders, but they are an excellent way of saving on energy costs in the summer as well as during the winter months. The minute you install security rollshutters from Jans Awning Products on your windows you will find that there are significant savings on your energy bills. While we focus on cottages in this post for rollshutters, they can be effectively used on:
• Windows & Skylights
• Sliding doors, entry doors and patio doors
• Screen Porches
• Pool houses
• Inside & Outside storage
The Advantages of Rollshutters
There are some distinct advantages to using these shutters:
• They are very effective in protecting your home/ commercial space from the weather. Snow storms can sometimes be very severe and when you put down the rollshutters you are assured that any debris or falling branches will not damage the glass on your doors and windows
• They do not rattle in high winds
• Significantly maintain the warm temperature in your home
• Offer very good insulation and you have complete control on maintaining the indoor temperature and keep it at comfortable levels
• You do not have to worry about getting expensive heating alternatives installed
• They are perfect protection from the cold but offer year-long protection too
The Convenience Factor
Since security rollshutters have a foam-filled profile, they are an excellent choice for maintaining the desired indoor temperature. You can choose between manual and automatic options, though the latter are very convenient and hassle-free. They can be operated either via a switch or remote control systems like Somfy and these systems are fitted inside your home, which adds to the convenience factor.
Once we install these security rollshutters, you have peace of mind that your home is secure from intruders and the weather. The fact that they complement any décor is a definite plus. You also get the amount of privacy you want and are able to manage artificial light. Incidentally, even as it makes your home more energy efficient, it also provides good noise insulation.
Since these shutters are set away from the glass, the air pocket that is created between the windows and the shutters provide added insulation. When you are considering installing security rollshutters, it is important to opt for high-quality ones like the ones that we provide. All our products are guaranteed and so is the motor of the automated ones. Putting a rollshutter up at your cottage not only prevents theft, it prevents damage from the heavy winds that seem to prevail in cottage country. One small hole in a cottage window can be an open invitation to critters of all manner. Why come back to your cottage in late spring to find that a family of skunks and bats have taken home in your country getaway. Not only will these critters cause damage from chewing, and animal droppings, there have been recent discovered cases of rabies in Ontario.
We also customize solutions for you and ensure that all the windows and doors are outfitted with perfectly-sized shutters. This winter, protect and insulate your home, office and commercial spaces with the best products from Jans Awnings. You can reach us on 905.335.3733 or via this online form and order your security rollshutters today.